Bungee Ties
 Self-piercing, round-head Bungee Ties are used for securing Scaffold Sheeting and/or Tarps to the Scaffold Structure.
| Cable Ties
High Strength Nylon Ties for securing Netting or Screen Tarps to scaffold, fencing or other structures. Heavy duty 120psi ties available for extensive application.
Various sizes available | Anchor & Strap
 This two-piece rubber strap and self-piercing anchor are designed to securely fasten Scaffold Sheeting to any scaffold. |
Wind Clips
Scaffold Wind Clips are used to secure plastic sheeting to most frame scaffold. Wind Clips are 11" long and should be placed every 3 feet along the scaffold frame.
| Tarp Grabbers
Create a tie-down grommet on any fabric by placing the fabric between the two-piece Tarp Grabber and tapping closed with a hammer.
| Screw-Loc Connectors
Screw-Loc connection for securing two ends of Scaffold Sheeting together.
|
Sheeting Knife & Sheath
Self-Piercing Sheeting Knife used for creating pilot holes for bungee attachments. Protective sheath fits on any conventional belt. | Pear Shaped Snap Clips
Zinc-plated Pear Shaped Snap Clips secure virtually any tarps and have a working limit of 1,4000 - 3,500 lbs.
Various Sizes Available | Pear Shaped Snap Clip - WM
Wide Mouth Pear Shaped Snap Clips secure virtually any tarps and have a working limit of 1,400 - 3,500 lbs.
Various Sizes Available |
Cable
Industrial Grade Wire Rope available in Galvanized or Stainless Steel.
Various Widths and Lengths Available
| Cable Clamps
Galvanized Cable Clamps are used to fasten two cables together or to create an eye loop in the cable.
Various Sizes Available | Shackles
Screw Pin Shackles
Various Sizes Available
|
Turnbuckles
Turnbuckles constructed of hot dip galvanized steel that is drop forged or stainless steel.
Various Types and Sizes Available
| Ground Anchor
Heavy duty painted steel Ground Anchor with large 8" single driving desk. | Magnet Bars
Magnet Bars are used to seal off containment on any flat surface steel structure.
|
Industrial Strength Tape
(Shrinkwrap Tape)
Industrial Strength Tape with single sided adhesive.
2" x 180" • 4" x 180" • 6" x 180"
(24/cs) (12/cs) (8/cs) | Double-Sided Tape
Double-Sided Cloth Tape with extremely aggressive adhesive. Industrial Strength for sealing most fabrics together.
2" x 50" • 2" x 75"
(20/cs) (24/cs) | Strapping
Heavy Duty Polyester Strapping can be used to help secure Shrinkwrap to any structure.
Standard and Heavy Duty Available |
Super Polytack
Super Polytack is the strongest adhesive available for bonding plastic sheeting projects.
| Shrinkwrap Torch Kit
Shrinkwrap Torch Kit includes a 300,000 BTU Field Torch, 25ft. Gas Hose, Regulator, 18" Extension and Tip Ignitor. | Shrinkfast Model 998
Shrinkfast Model 998 has up to 212,000 BTU of power and weighs only 2.2 lbs. The "dead man" trigger is designed to automatically shut off the flame once the trigger is released. This UL Listed Heat Gun includes 25' Gas Hose and Regulator.
|
Zipper Doors
Zipper Doors are designed to provide an easy Entrance /Exit Way through any Scaffold Sheeting, Shrinkwrap or poly made enclosure.
54" x 72" | Grommets
Replacement Grommets 3/8" or 1/2"
| Grommet Repair Kit
Grommet Repair Kit contains 24 sets of 1/2" Brass Grommets, hole cutter, punch, anvil and hardwood block. |
Spare Webbing
Replacement Webbing to patch minor tarp repairs. | Sewing Machine
Portable Hand-Held Sewing Machine for minor tarp repairs. Single thread chain stitch, oil-pump lubrication system, 110 VAC operation.
| Universal Band Clamps
(Fans/Ducting Hardware)
Universal Band Clamps with perforated opening. |
Bridge Band Clamps
(Fans/Ducting Hardware)
Stainless steel Bridge Band Clamps snugly fit between the raised helix on the ducting, assuring the tightest connection seal. | Flat Band Clamp
(Fans/Ducting Hardware)
Flat Band Clamps are ideal for joining dust socks or flexible ducting to a fan adapter or dust collector outlet. They feature zinc- coated construction, a quick-release handle and three adjustments for various thicknesses. | Latch-Loc Couplers
(Fans/Ducting Hardware)
Latch-Loc Couplers, made from 16 gauge galvanized steel, provides a positive lock that won't work loose in ordinary use. |
Slip-Loc Couplers
(Fans/Ducting Hardware)
Slip-Loc Couplers, made of stainless steel, provide a quick, convenient means for connecting the ducting hose with the screw clamps. |
|
|
